Embedded 4/8/16-CH Manuel d'utilisateur télécharger pdf (Page 30)

4/8/16-channel H.264 DVR User Manual

PPPOE: broadband dial-up network access, as shown below:

3G: 3G function (support CDMA 2000 and WCDMA),select WCDMA. After success to

apply, exit from 3G,and then you can see IP info .

PPPOE user name and password: Fill in the PPPOE user name and password

provided by the Internet service provider.

When one ADSL line is connected to one DVR only, you can select Internet connection

in the PPPOE mode, when the ADSL modem will connect the DVR directly. Then press

“Enter” to select PPPOE in the connection mode to enter the PPPOE Setup screen.

After entering the broadband user name and password, click “Enter” and the system

will restart. After that, the DVR will establish a network connection in the PPPOE mode

automatically. After successful connection, the IP on the IP address will be modified to

the acquired dynamic WAN IP address automatically.

Media port: the port number used in the private protocol communication between the

DVR and the PC end, usually being 9000 by default. If this port of the PC is occupied

by any other service, please modify it to an unused port.

WEB port: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

and enter “

http://192.168.1.223:88” in the address bar when accessing the DVR via the

IE.

IP address: allocating an IP address depending on the network environment of the

DVR

Subnet mask: filling in a subnet mask in depending on the network environment of the

DVR

Gateway: Setting the gateway depending on the network environment of the DVR. If

there is no router device in the network, please allocate an IP address on the same

network segment. If there is a router device in the network, you have to set the

corresponding gateway.

DNS1 and DNS2: setting the IP address of the domain name server (DNS varies from

city to city); you can refer to the domain name server configurations of the PC.

UPNP:When the UPNP function is on(UPNP function on the router end is also on of the

router setting), then the DVR will reflect the port and IP into the router automatically.

DDNS Setup

Click “DDNS Setup” to enter the following screen:

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 52 53

Pas de commentaire

Embedded 4/8/16-CH Manuel d'utilisateur Page 30